At the heart of Williams Cycles is our workshop. We are a registered Shimano Service Centre with Cyctech and NVQ qualified mechanics. Nothing is un-achievable here!
Brian Earp is our workshop manager; he has lived and breathed bikes his whole life. Andrew Reid is our senior mechanic and one of our longest standing employees.
Our workshop uses a booking in system. We will happily give you a free quote on any cycle, just bring it in; no obligations. We aim to offer an honest service; no work will be carried out without prior consent. We can store cycles but please be aware there is only so much space available.
Gear Check and Adjustments
Brake Check and Adjustments
Wheel Check + True of Wheels
Bolt Check and Tighten
Full Drivetrain Removal and Re-Grease
Includes the Labour for any Drivetrain Components Replaced
Includes the Labour for any Brake Pads Replaced
Full Clean and Re-Grease of the cycle
Headset and Bottom Bracket Bearings Checked, Tightened and Re-Greased (if required)
Full Strip down of the Frame and Components
All New Bearings and Cables (if required)
Full Hydraulic Brake Bleed + Service
All Labour charges for additional parts and accessories included
Deep Clean and Polish of Frame and Fork
(Shimano Steps and Bosch Only)
Clean out all Electrical Contacts
More thorough Clean of the Cycle
multiple rim, hub and spoke combinations are available.
Hub & Non-Standard Drive…£18
Replace Wheel (+ Wheel Cost)
Re-Grease Hub/Replace Axle…£16
Wheel True… From £10
Replace Headset or Forks…£20
Replace Brake Levers and Adjust…£16
Disc Mount Facing…£20
Bleed Hydraulic System (+ Fluid)…£12
Cable Brake Fitting and Adjust…£16
Replace or Repair Chain…£12
Replace Mech or Hanger and Adjust…£20
Replace Chainset/Bottom Bracket…£24
Bottom Bracket Facing…£18
Replace Shifter (single)…£16
Re-Grease of all seals and Fresh Oil
We reserve the right to amend these prices at any time.